Matrox M.Key/100 Installationshandbuch PDF herunterladen (Seite 11)

Chapter1　Installing Windows Server 2003

Manual OS Installation

1.2 Installation Procedure

This section explains how to install Windows Server 2003/Windows Server 2003 x64/Windows

Server SBS 2003 manually.

■

Requirements

• Windows Server 2003 or Windows Server 2003 x64 CD/DVD (installation disc)

• PRIMERGY Startup Disc (supplied with the server)

• A driver disk created in advance

1 Turn on the server.

2 Insert the Windows Server 2003 or Windows Server 2003 x64 CD/DVD and the array con-

troller driver disk.

Turn on the server, and immediately insert the Windows Server 2003 or Windows Server 2003 x64 CD/DVD into the

CD/DVD drive, and the array controller driver disk into the floppy disk drive. When the active area is specified on

the hard disk, the following message appears.

Press any key while this message is displayed to boot from the CD/DVD drive.

3 The [ Windows Server 2003 or Windows Server 2003 x64 Setup] window appears.

Immediately after the setup window appears, the following message is displayed at the bottom of the window. Press

the [F6] key.

4 Install an array controller driver manually.

1 When the following message appears, press the [S] key.

2 When the message "Please insert the disk labeled Manufacturer-supplied hardware

support disk into Drive A:" appears, press the [Enter] key.

The following message appears.

On certain occasions, the message may not appear.

◆ For details on the OS settings, refer to the following website.

http://technet.microsoft.com/en-us/library/bb123872(EXCHG.65).aspx

◆ For using the external Floppy Disk, connect the USB connector to the server

before turning on the power.

Press any key to boot from CD...

Press F6 if you need to install a third party SCSI or RAID driver ...

This message is displayed for a short time after the setup window (blue

screen) appears.

Press the [F6] key immediately after the window turns blue.

To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Win-

dows, including those for which you have a device support disk from a mass storage device manu-

facturer, press S.

You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk

provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC to return to the previous

screen.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Keine Kommentare

Matrox M.Key/100 Installationshandbuch Seite 11